List of Top 10 Best Daytime Running Lights

Bestseller No. 1
AUXITO 9005 LED Daytime Running Light, 6500K Cool White, 30W 6000LM, DRL Replacement for Toyota, Chevy, Pack of 2
  • [ 2 PCS 9005 DRL & 400% Brighter] 3000 LM per DRL bulb, total 6000 LM for both 9005, HB3 LED DRL lights. These two DRL lights are equipped with high illumination and high power 6 pieces CSP LED chips, 400% brighter than stock halogen bulbs
  • [ Fast Heat Dissipation & Long Lifespan] Compared with the 30W power of the original drl light, AUXITO 9005 daytime running light only need 15W, which greatly reduces power consumption. The all-in-one compact design with full-body aluminum material makes the drl light live more than 50,000 hrs
  • [ Cool White & Waterproof] The color temperature of the two HB3 LED drl light bulbs is 6500K. Instead of the dim yellow OEM fog light, the cool white bulbs will make your car more modern. The IP67 waterproof can be applied to foggy, rainy, snowy, dusty all weather conditions
  • [ Easy Installation &1:1 Safe Beam Pattern] AUXITO 9005 drl lights are wireless designed, non-polarity plugs. Ultra-thin copper circuit board and almost 1:1 same light filament position effectively simulates stock 9005/HB3 bulbs’ beam pattern, come out 360° full angle illumination
  • [ Important Notice] AUXITO 9005 drl lights can only be used as daytime running lights (DRL bulbs). They cannot be used as a headlight low beam or high beam. Before order the fog lights, please double check your owner’s manual or the original bulb to confirm the correct bulb size
Bestseller No. 2
3157 3156 4114 Daytime Running Light Bulbs DRL Driving Light 60LED 3528-SMD 6000K Xenon White Ultra Bright Car Led Bulbs (Pack of 2)
  • Application on: 3157 3156 4114 3357A 3457A 60-3528-SMD White Hight Power LED cab be used as DRL Daytime Running Light Bulbs.
  • Notes: 3157 have two types of bulbs, ours is the standard 3157, not CK 3157.
  • Part # Cross Reference: 3047 3057 3157 3357 3457 4057 4114 4157; Color temperature: 6000K; Housing Material: Aluminum Alloy; LED source: 60-3528-SMD
  • Long-lasting Life - 50000 working hours, Easy installation- Plug N Play; Faster on/off response time and vibration resistant; If the LED does not light up, simply flip it 180 degrees.
  • Please check your stock vehicle part number before purchase.Load Resistor will be needed for some car if there is flash after installing this bulb
Bestseller No. 3
Combriller 3157 LED Bulb White 6000K, 3056 3156 3057 4157 led bulb with Projector Replacement for led reverse lights turn signal bulb brake light bulb tail light bulb parking light bulb, pack of 2
  • BRIGHT AND CLEAR: Combriller 3157 LED bulb is built with 36-SMD 2835 LED chips, delivering 360 degree full angle illumination with projector lens design, 300% Brighter than halogen bulbs, increased brightness makes you noticed when reversing/braking/turning around
  • PLUG AND PLAY: Non-polarity design, this 3157 LED bulb is built with 1:1 same socket as halogen bulb, ensures a perfect electrical fit with your car, just remove the original bulb and install Combriller 3157 LED bulb, plug and play in 20 minutes. Fit for 3157, 3056, 3156, 3047, 3057, 3457, 4057, 4114, 4157, 3156NA, 3156A, 3057A, 3157A, 3157NA, 3457A, 3457K, 3457NA, 4157NA, 5702 ect
  • APPLICATION: replacement for Brake Lights, Turn Signal Lights, Reverse Back Up Lights, Tail Lights, Parking Lights, Side Marker Lights, Daytime Running Lights etc. Extra load resistor or flash relay might be needed to prevent the error code or hyper flash issue when replacement for Turn Signal Lights
  • LONG LIFESPAN: built-in smart IC driver ensures constant current, output consistent brightness without radio interference, ensures a long lifespan to more than 50,000 hours
  • NOTE: Different sockets on different vehicles require different size bulbs, Please confirm the bulb's size or check owner's manual to verify compatibility before purchase. Any problem, please feel free to contact us
Bestseller No. 4
Alla Lighting 3157 LED Bulbs Super Bright 3156 3056 3057 4157 3457 4057 LED Brake Stop, Back-up Reverse, Turn Signal Lights, DRL, Taillights, 6K Xenon White
  • (Set of 2 3156/3157 LED bulbs) LED Chips: 39 pieces high quality,high power with high performance led chips per 3156 3157 LED bulb ---360 degree full angle illumination with projector lens design
  • Compatible with both standard and CK / SRCK type. Voltage: 12V - 14.8V, Built in stable current IC driver for longer lifespan.
  • Non-polarity. Fit for 3156, 3157, 3056, 4156, 3047, 3157A, 3057, 3357, 3457, 4057, 4114, 4157, 3757, 3457NAK, 3157AK, 4157NAK, 3157LL, 5702A, 5702AK, 5702AK,p27/7w, 3155, 3047KX, 3157KX, etc
  • Application: Used for upgrading the stock halogen dim turn signal blinker light, backup reverse light, brake stop lights, taillights, side marker light, daytime running light ( DRL) lamp for much safer driving and luxury looking,load resistor maybe required to avoid the fast blinking issues.
  • Warranty: fully ONE YEAR guaranteed for the manufacturer defect.please check the fitment note application before purchasing.
Bestseller No. 5
iJDMTOY (2) 6500K White LED Daytime Running Light Bulbs Compatible With Jeep 2015-2018 Pre-LCI Renegade
  • Compatible with 2015-2018 Jeep Renegade
  • Powered by 15 pieces of SMD LED lights and 5W output with a 360 degree illumination
  • 6500K xenon white output
  • Lights up super bright as daytime running lights and dims when headlamps are on
Bestseller No. 6
2X LED DRL Intergrated Daytime Running Lights Compatible with Mercedes Left Right
  • Package Includes: 1 Pair LED with Daytime Running Light (Left and Right)
  • Compatible with 2011-2013 Mercedes W204 C-Class Facelift
  • Make the Driver's Safety with a Decisive Safety Leap and Better Visibility in Road Traffic by High Quality LED DRL
  • Ensure the LEDs not Overheated and Longer Lifespan with Professional Housing Design
  • Reference Part Number : 2048803224, 2048803324 | MB1039117, MB1038117
Bestseller No. 7
AKKON - For 2007-2014 Cadillac Escalade Xenon/HID Model Type Black Smoked LED Daytime Running Light Tube Projector Headlight
  • Fits 2007-2014 Escalade Model, 2007-2014 Escalada ESV, 2007-2013 Escalade EXT, ***Compatible w/ Factory HID/XENON Headlight Model Only***
  • No Installation Guide or Instruction Included Professional Installation is Highly Recommended
  • Comes in a Pair, Which Means Included Left Side (Driver Side) & Right Side (Passenger Side)
  • Direct Bolt On Replacement For Your Original Headlights No Wiring or Any Other Modification Needed
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) Approved; Wiring Modification Might Be Needed On Halo And LED Connection, Please Check With Local Professional Mechanic
Bestseller No. 8
AKKON - For 1998-02 Chevy Camaro LED Daytime Running Lamp Ring Projector Headlights & Tail Lights Full Bundle Set
  • Fits 1998-2002 Chevrolet Camaro
  • Comes in a Pair, Which Means Included Left Side (Driver Side) & Right Side (Passenger Side)
  • Direct Bolt On Replacement For Your Original Headlights And Tail Lights, No Wiring or Any Other Modification Needed
  • Items Do Not Include Light Bulbs, No Installation Guide Included, Professional Installation is Highly Recommended
  • 90 Days Limited Warranty on All of Our Product
Bestseller No. 9
LEADTOPS Daytime Running Lights LED White Light L-Shape Strips 72 SMD Glass LENS with Back Sticker 12V DRL 6W DIY LED Lamp 100% Waterproof,1 Year Warranty (2 Pack)
  • Easy Using- Red wire is connected to positive pole and another wire connected to the negative pole and just stick-on plug & play. 🧡Note: It is not flexible,check if you can use before buy.
  • SIZE- 17.5cm x 3.8cm x 0.5cm. Voltage: DC 12V.🧡Note: Check size if you like before buy.
  • WATERPROOF- It can light in rainy and foggy days,bringing more safety to you and family.🧡Note: In order to have a better waterproof effect, you can use glue to coat the contact position between the wire and the lamp.
  • ENERGY SAVING- Low power consumption and vibration resistant.
  • FIT- Available for most of car like Ford/BMW/Audi/Benz/Chevroler/Volkswagen and so on. 🧡Note: The lamp can be put down as long as it can be installed.
Bestseller No. 10
AUTOPA 2049069000 Front Right Daytime Running Fog Light Driving Lamp Assembly for Mercedes W212 C250 C300
  • For Mercedes-Benz C250 C350 SLK250 2013-2015; For Mercedes-Benz E350 E550 2013
  • For Mercedes-Benz SLK300 2016; For Mercedes-Benz SLK350 SLK55 AMG 2013-2016
  • Enhance Performance.Easy Installation.High Reliability
  • Perfect Match for the Original Car.Please verify Fitment or Application
  • Replacement OEM ( Original Equipment Part ) Number : 2049069000, 204 906 90 00. Other Part Number : MB2563105

Buyer’s Guide

How to choose the best Daytime Running Lights

Daytime running lights (DRL) are designed to be installed on vehicles during daylight hours only. DRLs provide additional visibility to drivers while driving at night. DRLs are typically mounted on the front windshield of a vehicle. Some states require that DRLs be installed on certain types of vehicles including trucks buses and commercial motor vehicles. Other states allow DRL installation on passenger cars motorcycles and mopeds. In addition many manufacturers install DRLs on their own vehicles.

The primary reason why we need to install DRLs at night is because most accidents occur between dusk and dawn. According to the National Highway Traffic Safety Administration there are approximately 2 million crashes involving large trucks each year. Many of these crashes happen at night due to poor lighting conditions. Another common cause of nighttime accidents is fatigue. Drivers who drive long distances at night are more likely to fall asleep behind the wheel.

Daytime running lights are designed to increase driver awareness and alertness. During the day our eyes naturally adjust to ambient light levels. However when we’re driving at night our vision becomes impaired. Our pupils dilate making us unable to see clearly. As a result we become distracted and lose concentration. Because of this we must rely on visual cues to stay awake and aware. DRLs are designed to mimic natural sunlight providing a bright source of illumination. This makes it easier for drivers to spot objects around them.

There are no downsides to installing DRLs. However there are several disadvantages to using them. First DRLs consume power. Depending on the type of bulb being used DRLs can drain anywhere from 1-2 amps per hour. Second DRLs can reduce the effectiveness of headlights. Third DRLs can interfere with the operation of other car accessories such as cruise control systems. Finally DRLs can create glare problems for other motorists.

Yes! DRLs are safe for both passengers and pedestrians. DRLs emit very little heat and pose no threat to anyone nearby. Furthermore DRLs are required by law in many countries.

Daytime running lights (DRL) are essential safety equipment for drivers who drive during daylight hours. DRLs provide visibility to motorists behind vehicles especially those driving at night. Without these lights motorists could be unaware of approaching traffic and become involved in accidents. In addition many states require that all motor vehicle operators must install DRLs on their vehicles.

Drivers rely heavily upon the ability of their headlights to illuminate the road ahead. However most modern cars lack adequate lighting systems. As a result drivers are forced to depend solely on the illumination provided by their car’s headlight bulbs. Unfortunately these bulbs only produce enough light to see objects approximately 100 feet away. Therefore drivers cannot see anything beyond that distance. This makes it difficult for drivers to detect obstacles or hazards on the roadway.

There are several advantages to using DRLs. First DRLs increase driver awareness. Second DRLs improve nighttime vision. Third DRLs reduce glare. Fourth DRLs allow drivers to identify potential problems while driving. Finally DRLs improve overall visibility. All of these benefits contribute to safer driving conditions.

Yes! Many manufacturers now include DRLs as standard equipment on newer models of automobiles. Most importantly DRLs are required by law in all 50 states. Even though there are no federal regulations regarding DRLs most states require that all vehicles manufactured after 1996 include DRLs. Additionally most states require that all vehicles manufactured after 2001 include DRLs. Some states mandate that all vehicles manufactured after 2005 include DRLs. Regardless of which state requires DRLs all states agree that DRLs are necessary for safe driving.

No! While replacing old headlamps is certainly recommended it is not mandatory. Manufacturers continue to develop brighter and more efficient lamps. Today most vehicles already include high-intensity discharge (HID) lamps. HIDs are far superior to halogen bulbs because they emit greater amounts of visible light. Also HIDs last longer and consume less power than traditional incandescent bulbs. Thus replacing old bulbs with HIDs is highly advisable.

Yes! Installing DRLs is easy. Simply remove the existing bulb and replace it with a new lamp assembly. Then attach the lens cover and tighten the screws. Once installed check the alignment of the lenses and adjust accordingly. Next test the lights to ensure proper operation. Lastly apply a coat of protective paint to the lenses to prolong their lifespan.

Features To Look For When Buying A Daytime Running Lights?

Daytime running lights (DRL) are essential safety equipment for drivers who drive during daylight hours. DRLs provide visibility to motorists behind vehicles equipped with these devices. The most common type of DRL is the brake-activated headlight which automatically turns on whenever the vehicle brakes. Other types include turn signals tail lights stop lamps fog lights and backlights.

Types of Brake Activated Headlights

There are two main types of brake activated headlights; those that activate only when braking and those that activate both when braking and turning. Some manufacturers produce both types of headlights. Most modern cars have automatic activation systems that turn on the headlights when the car slows down. However there are still many vehicles available today that require driver intervention to activate the headlights.

Benefits of Brake Activated Headlights

Brake activated headlights improve road safety because they increase the distance between the front of the vehicle and the rear of the vehicle. In addition they reduce glare for drivers following closely behind the vehicle. Drivers using brake activated headlights see objects further away and therefore have a greater field of vision.

The brake lights on a vehicle illuminate when the brakes are applied. As soon as the brakes are released the lights go dark again. Many newer models of automobiles have sensors that detect when the brakes are being pressed. Once the sensor detects pressure on the brake pedal it sends a signal to the lighting control module. The lighting control module activates the headlights based on the amount of pressure detected.

Advantages of Automatic Brake Activated Headlights

Automatic brake activated headlights eliminate the need for drivers to manually operate the headlights. Therefore they allow drivers to concentrate on driving rather than operating the headlights. Additionally automatic brake activated headlights conserve battery power since they do not continuously shine bright lights while the vehicle is stationary.

Disadvantages of Automatic Brake Activated Headlights

Some drivers dislike the fact that automatic brake activated headlights turn on when the vehicle stops. Others complain that the headlights remain illuminated even though the vehicle has stopped.

Different Types of Daytime Running Lights

Daytime running lights (DRL) are essential safety equipment for drivers who drive during daylight hours. DRLs provide visibility to motorists behind you while driving at night. The most common type of DRL is the brake light which flashes red when activated. Other types include turn signals tail lights back-up lights fog lamps and hazard flashers. All these devices must be installed correctly and maintained properly to ensure safe operation.

Types of Brake Light Systems

There are two main types of brake light systems: mechanical and electrical. Mechanical brakes consist of a series of levers connected to a cable that activates the brake pedal. Electrical braking consists of a switch inside the vehicle that connects to the battery. Both methods activate the same brake pedal; however there are differences between the two. For example mechanical brakes require constant maintenance because the cables wear out over time. In contrast electrical brakes only require periodic inspection and replacement of bulbs.

Electronic Brakes

Electronic brakes are becoming increasingly popular due to their convenience and ease of installation. However electronic brakes are prone to failure. Because they rely on electronics rather than physical parts they are susceptible to power surges short circuits and faulty wiring. Therefore it is important to check the condition of your brake system regularly. Also always replace worn components immediately to avoid costly repairs.

Drivers use their brake lights to alert others of their intentions. Most states require that vehicles display three different colored lights. The front brake lights are required to flash continuously. The rear brake lights are required to flash intermittently. Finally the left side marker lights are required to flash alternately whenever the driver turns on his/her signal. Failure to comply with state regulations could result in fines and penalties.

Tail Lights

The tail lights are located on both sides of the car. Tail lights serve several purposes including signaling to following traffic providing illumination and indicating direction of travel. Many states require that tail lights remain illuminated at all times except when parked. Some states require that tail lights illuminate automatically when the ignition key is turned on. Others require that tail lights stay lit unless the headlights are turned on. Regardless of the requirements tail lights must be inspected periodically to ensure proper function.

Back-Up Lamps

Back-up lamps are designed to assist drivers backing up. Back-up lamps are typically mounted on the trunk lid or hood of the vehicle. They are intended to warn approaching cars of the presence of the vehicle being backed up. To operate safely back-up lamps must be visible to oncoming traffic. Additionally they must be able to withstand extreme temperatures and weather conditions. Back-up lamps are generally powered by 12 volts DC.


  • 03 Silverado Tail Lights
  • 04 Silverado Headlights
  • 1157 Led Bulb
  • 12v Car Heater
  • 13 Inch Trailer Tires
  • 150cc Scooters
  • 15×8 Wheels
  • 17 Inch Dually Wheels
  • 17 Inch Wheels
  • 17×9 Wheels
  • 18 Inch Wheels
  • 2 5 16 Trailer Hitch
  • 2 Person Electric Scooters
  • 20 Inch Rims For Honda Accord
  • 20 Inch Steel Wheels
  • 20 Inch Wheels
  • 200cc Mini Bike
  • 212cc Mini Bike
  • 22 Inch Tires
  • 2357 Bulb
  • 250cc Scooters
  • 3 Exhaust Pipe
  • 3 Spoke Wheels
  • 3 Wheel Electric Scooter For Adults
  • 3 Wheel Electric Scooters
  • 3 Wheel Scooters
  • 3157k Bulb
  • 33 Inch Tires
  • 35 Inch All Terrain Tires
  • 35 Inch Tires
  • 35 Window Tint
  • 350z Headlights
  • 350z Wheels
  • 360 Car Camera
  • 36mm Axle Nut Socket
  • 37 Inch Tires
  • 3m Rubbing Compound
  • 4 Lug Wheels
  • 4 Way Lug Wrench
  • 4 Wheel Electric Scooter
  • 4 Wheel Mobility Scooter
  • 40 Mph Electric Scooters
  • 49cc Scooters
  • 4runner Bronze Wheels
  • 4runner Grill
  • 4runner Headlights
  • 4runner Wheels
  • 4×100 Wheels
  • 4×6 Led Headlights
  • 5 Spoke Wheels

Categories: Reviews


Leave a Reply

Avatar placeholder

Your email address will not be published.