List of Top 10 Best Impact Drill


Bestseller No. 1
DEWALT 20V MAX* Cordless Impact Driver Kit, Brushless, 1/4-inch (DCF787C2)
  • Brushless motor for efficient performance and runtime
  • 1500 in-lbs of torque delivering the power you need to get a majority of applications done.
  • LED light with 20 second delay after
  • Variable speed trigger allows for control and precision on delicate work surfaces
SaleBestseller No. 2
DEWALT ATOMIC 20V MAX* Impact Driver, Cordless, Compact Kit, 2 Batteries, 1/4-Inch (DCF809C2)
  • Only 5.1-inch in length of DEWALT impact driver is designed to fit in tight spaces
  • 1700 in-lbs of torque of the cordless impact driver delivering the power you need to get a majority of applications done
  • Variable speed trigger of DEWALT 20V 1/4 impact driver allows for control and precision on delicate work surfaces
  • DEWALT built brushless motor for efficient performance and runtime
  • 3 bright LEDs for dimly lit workspaces
SaleBestseller No. 3
DEWALT 20V Max Cordless Drill Combo Kit, 2-Tool (DCK240C2),Yellow/Black Drill Driver/Impact Combo Kit
  • DCD771 in cordless drill combo kit features 2 speed transmission (0-450 / 0-1500 RPM)
  • DCD771 high performance motor of cordless tools combo kit delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • DCD771 compact, lightweight design of the drill/ impact driver combo kit fits into tight areas
  • DCD771 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength
  • DCD771 Ergonomic handle delivers comfort and control
SaleBestseller No. 4
BLACK+DECKER 20V MAX* POWERCONNECT 1/4 in. Cordless Impact Driver Kit (BDCI20C)
  • COMPACT AND LIGHTWEIGHT – Helps prevent muscle fatigue.
  • QUICK-RELEASE CHUCK – 1/4 in. hex chuck designed for fast and easy bit changes.
  • HIGH-PERFORMANCE TRANSMISSION – Powers up to 1,375 in-lb of maximum torque, 3,000 rpm, and 3,900 ipm.
  • SOFT-TOUCH GRIP – Designed to enhance comfort and reduce fatigue.
  • POWERCONNECT BATTERY SYSTEM – Interchangeable battery system means you can use one battery for multiple different tools.
Bestseller No. 5
Ryobi P235A 18V One+ Impact Driver (Bare Tool)
  • Not in Retail Packaging Bare tool only
  • charger and battery NOT included
  • Easy and quick bit changes with 1/4-in quick connect coupler
  • Encased in a sturdy and durable cast aluminum gear housing Convenience of placement of screws and bits with the MagTray magnetic holder Boasts up to 3,200 impacts per minute Impressive 1,800 in-lbs. of torque and a variable speed trigger
SaleBestseller No. 6
DEWALT 20V Max Impact Driver Kit, 1/4-Inch (DCF885C1)
  • Compact (5.55 front to back), lightweight (2.8 lbs) design fits into tight areas
  • 3 LEDs with 20-second delay after trigger release, provide visibility without shadows
  • One-handed loading 1/4 hex chuck accepts 1 bit tips
  • Backed by dewalt's 3 year limited warranty
SaleBestseller No. 7
DEWALT 20V MAX XR Impact Driver, Brushless, 3-Speed, 1/4-Inch, Tool Only (DCF887B)
  • DEWALT built brushless motor and XR Li-Ion batteries of DEWALT impact driver deliver more run time and capacity over standard units
  • The cordless impact driver has 3-speed settings for optimized application versatility
  • Precision drive in speed 1 for precision applications and added control
  • 3 LEDs with 20-second delay after trigger release, provide visibility without shadows
  • One-handed loading 1/4-inch hex chuck with easy grip sleeve, accepts 1-inch bit tips
Bestseller No. 8
POPULO Impact Driver Kit, 1770 in-lbs 20V Max Lithium Ion Cordless 1/4" Hex Impact Drill, 39 Piece S2 Impact Drive Bits,0-2900RPM Variable Speed, 2.0 Ah Li-ion Battery,Fast Charger.
  • 4 POLE MOTOR & 1,770 IN-LBS TORQUE - Our compact 4 pole motor provides higher efficiency, has double work output than a regular brushed 2 pole motor, compared to brushless motor, the performance is closer but more economic. Variable speed up to 2900 RPM and high torque up to 1,770 in-lbs, our impact driver can drive screws or tighten nuts at astonishing speed.
  • VARIABLE SPEED & REVERSE CONTROL - The speed of the impact driver can be adjusted from 0 to 2900 RPM by the amount of trigger force. The variable speed control was designed for a wide range of fastening applications. Prefect for repairing work, furniture assembling and other DIY hand working.The forward/reveser switch allows screws driving or unscrewing with convenience.
  • ¼” QUICK RELEASE CHUCK, BUILT-IN LIGHT, BELT CLIP - Compact (6”) and lightweight (2.68 lbs - bare tool) design fits into tight areas and minimizes user fatigue. The impact driver comes with a built-in LED light that increases visibility when working in enclosed work spaces or any dark environment. The metal and reversible belt clip helps to keep the driver when on a ladder or somewhere you need.
  • LITHIUM ION TECHNOLOGY & 20V MAX - Power up for a longer runtime, no memory and more compact and lighter, much convenient than the corded. Battery gauge fuel easy to check how much power is left and when the battery needs to be recharged. Expectancy of each Populo battery is at least 500-1,000 cycles, so you do not need to worry about the dying batteries or batteries won’t charge after minimal usage. The battery is also interchangeable with other tools part of the Populo 20V Max system.
  • ULTIMATE ACCESSORIES SET -  Impact Driver, 1" Impact Driver Bits (20Pcs), 2" Impact Driver Bits (6Pcs), 2" Regular Driver Bits (2Pcs), Sockets (10Pcs), Extension Bit Holder (1Pcs), 20V Max Li-ion Battery, Fast Charger, Belt Clip, Power tool bag all included, ideal for any work around the home or the people who are tasked with driving screws and tightening nuts, for examples remodeler, electricians, cabinet installer, woodworkers, handicraft lovers etc.
SaleBestseller No. 9
AVID POWER Cordless Impact Wrench, 1/2 Impact Gun w/ Max Torque 330 ft lbs (450N.m), 20V Impact Driver Kit w/ 3.0A Li-ion Battery, 4 Pcs Drive Impact Sockets and 1 Hour Fast Charger, Electric Impact
  • [Powerful Motor] By removing rusted-on or excessively tightened nuts and bolts, this 1/2 impact wrench, which has a high-end, strong motor, offers maximum productivity. Maximum torque for tightening is 330 ft-lb, and loosening is 370 ft-lb.
  • [Infinitely Speed Control] You can effortlessly adjust the speed of your wrench from 0-2000 RPM with the variable speed trigger. The further you press the trigger, the higher speed achieved.
  • [3.0A Battery & Fast Charging] 3.0A battery, which has larger capacity and longer life, allows our power wrench to run longer than those wrenches using 2.0A battery. Charging time is greatly reduced to 1.5 hours with the fast charger.
  • [Unique Friction Design] The AVID POWER impact wrench has a special friction design rather than a bearing ball, which can hold sockets onto the anvil more firmly and enable more efficient socket replacements. Please note that there is no bearing ball in the hole of the anvil.
  • [Wide Application] In addition to being effective for changing tires of various vehicles, this impact drill may also be used for heavy equipment maintenance, significant building projects, product assembly, and automotive repairs, etc.
Bestseller No. 10
CRAFTSMAN 20V MAX Impact Driver Kit, 1 Battery, 1/4-Inch (CMCF800C1) , Red
  • HIGH PERFORMANCE: The cordless impact driver delivers 1,460 in-lbs. of torque and max 2,800 RPMs/3,100 IPMs for quick fastening applications
  • QUICK AND EASY: Quickly release chuck for easy one-handed bit changes
  • IMPROVED VISIBILITY: LED light helps in dark work areas

Buyer’s Guide

How to choose the
best impact drill

What is the Purpose Of An Impact Drill?

An impact driver is a tool designed to drive screws into hard materials such as concrete, brick, tile, plasterboard, drywall, metal, plastic, etc. Most commonly, these tools are used to install wall anchors, ceiling tiles, picture hangers, light fixtures, electrical boxes, plumbing pipes, and many others. In addition to driving fasteners, impact drivers can be used to remove old nails, staples, tacks, and screws.

How Does An Impact Driver Work?

The main function of an impact driver is to deliver high-speed impacts to a material being worked upon. To accomplish this task, the motor rotates a chuck which holds the screwdriver bits (also known as “bits”) onto the end of the shaft. As the motor spins, the bits rotate along with the shaft. Once the bits reach the tip of the shaft, they strike the head of the screwdriver bit, causing the bits to break away from the shaft. At this point, the bits fall free and continue rotating around the shaft. The spinning bits eventually hit the target object and embed themselves deep within its structure. After several strikes, the bits become embedded in the target material and create holes large enough to accept the next set of bits.

Types of Bits Used With Impact Drivers

There are two types of bits available for use with impact drivers – standard bits and countersink bits. Standard bits are typically longer than counter sink bits and are intended to penetrate deeper into the target material. Counter sink bits are shorter and are meant to only go part way into the target material. Both types of bits are useful depending on the application. For example, if you are installing a fixture into a piece of drywall, using a standard bit will allow you to get the entire length of the bit into the hole created by the installation process. However, if you are drilling a hole into a concrete slab, using a counter sink bit will ensure that the bit does not protrude above the top edge of the hole once installed.

Benefits of Using an Impact Driver

Impact drivers are very versatile and can be used for numerous applications. Some common uses include:

Installing hardware components such as light bulbs, switches, outlets, and faucets

Installing hardware components such as light bulbs, switches, outlets, and faucets

Drilling pilot holes for hanging pictures, mirrors, shelves, cabinets, and other objects

Drilling pilot holes for hanging pictures, mirrors, shelves, cabinets, and other objects

Removing old nails, staples, and screws

Removing old nails, staples, and screws

Punching holes in sheetrock,

The Importance of Purchasing a Quality Impact Drill

An impact driver is a tool which has been around since the early 1900’s. An impact driver was originally designed to be used with nails and screws. However, today there are many different types of drivers available including drills, screwdrivers, nutrunners, etc. There are two main reasons why you should invest in an impact driver; safety and efficiency.

Safety

Impact drivers are very dangerous tools. In fact, according to OSHA (Occupational Safety & Health Administration), “an electric motor-driven power tool is considered hazardous equipment because of its potential to cause serious injury or death.” Therefore, it is important to take precautions while using these devices. For example, always wear eye protection and ear plugs whenever operating an impact driver. Always keep children away from the machine and ensure that no objects are placed near the point where the hammer strikes the object being drilled into. Never operate the tool unless you understand how to properly hold it and position it correctly.

Efficiency

Another reason why you should invest in an impact driver is due to its ability to efficiently perform multiple functions. Most impact drivers include both a drilling function and a driving function. As mentioned above, most impact drivers are powered by electricity. Electricity is extremely efficient compared to gasoline engines. Because of this, an impact driver is able to complete a task faster than a traditional hand held drill. Additionally, impact drivers are typically quieter than gas driven drills. This is especially helpful during construction projects where noise levels must remain low. Lastly, impact drivers are versatile enough to handle almost anything. From small holes to large diameter bolts, an impact driver can tackle virtually everything.

Types of Drivers Available

There are several different types of impact drivers available. Some common ones include corded and cordless models. Corded impact drivers require a source of electrical current to run. Cordless impact drivers only require batteries. Both options are safe and effective depending on the type of project you are performing.

Corded vs. Cordless

Most manufacturers recommend that you use a corded impact driver for smaller jobs. While cordless impact drivers are convenient, they lack the torque necessary to drive larger fasteners. Furthermore, cordless impact drivers cannot be plugged directly into outlets. Instead, they require charging stations. Charging stations are generally bulky and inconvenient.

Drilling Speed

One of the biggest differences between a corded and cordless impact driver is

An electric powered tool is essential for most jobs around the house. From drilling holes in drywall to driving screws into concrete, there’s no task too small or large for these tools. However, choosing the right power tool isn’t always easy. There are many different types available, each designed to perform specific functions. Here we take a closer look at three popular models and highlight features to look for when purchasing an impact driver.

The Bosch Powermatic 18V Compact Drilling Machine

This compact unit has a maximum speed of 1,500 RPM and comes equipped with a variable speed trigger switch. It weighs only 4 pounds making it ideal for smaller projects where portability is important. Its lightweight design makes it easier to carry around while still providing powerful performance.

The Milwaukee M18XR Variable Speed Hammer Driver

With its ergonomic handle, this hammer driver offers two speeds – slow (600 RPM) and fast (1,200 RPM). It’s perfect for general household applications including framing walls, installing trim, hanging pictures, etc. With its adjustable clutch mechanism, users can adjust the torque setting depending on the material being drilled.

The Makita XCD20C 20V Corded Electric Impact Driver

This cordless impact driver is capable of delivering 2,000 foot per minute which makes it suitable for heavy duty applications. It includes a built-in LED light that illuminates the work area during operation. Users can set the depth control between 0mm and 60mm and select either high or low speed modes.

Benefits of Using an Impact Driver

Powerful motor delivers higher torque output

Easy to operate

Lightweight and portable

Ergonomically shaped handles

Adjustable clutch mechanism

LED lighting

<

An impact driver is a power tool designed to drive fasteners into hard materials. An impact driver has two parts – a motor which generates torque (rotational force) and a hammer mechanism which delivers the rotational force to the tip of the driver.

Types of Impact Drivers

Impact drivers are available in corded and cordless versions. Corded models require a battery pack while cordless models run on rechargeable batteries.

The most common type of impact driver is the pneumatic powered version. Pneumatic impact drivers operate using compressed air rather than electricity. Air pressure pushes the piston forward causing the driver head to strike the nail.

Electric impact drivers are another popular choice. Electric impact drivers deliver high speed rotation via electric motors. Most electric impact drivers include variable speeds ranging from slowest to fastest.

Air driven impact drivers are very powerful tools. However, these devices are noisy and produce large amounts of dust. For safety reasons, we recommend avoiding these tools unless absolutely necessary.

Hand held impact drivers are lightweight and easy to handle. Handheld impact drivers are ideal for driving small nails and screws. Some handheld impact drivers incorporate LED lights to illuminate the work site.

Benchtop impact drivers are heavy duty machines. Benchtop impact drivers are best suited for drilling holes larger than 1 inch diameter. Benchtop impact drivers typically weigh between 10 pounds and 100 pounds.

Cordless impact drills are compact and light weight. Cordless impact drills are perfect for those who travel frequently. Many cordless impact drills allow users to change bits quickly and efficiently.

Powerful cordless impact drills are capable of delivering higher RPM rates. Powercordless impact drills are useful for drilling holes larger than 2 inches in diameter.

Powered hand held impact drills are versatile tools. Powered hand held impact drills are excellent for drilling holes smaller than 3 inches in diameter.

Rotary hammers are used to drive fasteners into concrete, masonry, brick, tile, stone, etc. Rotary hammers are generally heavier than bench top impact drivers.

Sawzall style impact drivers are used to cut metal. Sawzalls are lighter than

Punching holes in sheetrock,

The Importance of Purchasing a Quality Impact Drill

An impact driver is a tool which has been around since the early 1900’s. An impact driver was originally designed to be used with nails and screws. However, today there are many different types of drivers available including drills, screwdrivers, nutrunners, etc. There are two main reasons why you should invest in an impact driver; safety and efficiency.

Safety

Impact drivers are very dangerous tools. In fact, according to OSHA (Occupational Safety & Health Administration), “an electric motor-driven power tool is considered hazardous equipment because of its potential to cause serious injury or death.” Therefore, it is important to take precautions while using these devices. For example, always wear eye protection and ear plugs whenever operating an impact driver. Always keep children away from the machine and ensure that no objects are placed near the point where the hammer strikes the object being drilled into. Never operate the tool unless you understand how to properly hold it and position it correctly.

Efficiency

Another reason why you should invest in an impact driver is due to its ability to efficiently perform multiple functions. Most impact drivers include both a drilling function and a driving function. As mentioned above, most impact drivers are powered by electricity. Electricity is extremely efficient compared to gasoline engines. Because of this, an impact driver is able to complete a task faster than a traditional hand held drill. Additionally, impact drivers are typically quieter than gas driven drills. This is especially helpful during construction projects where noise levels must remain low. Lastly, impact drivers are versatile enough to handle almost anything. From small holes to large diameter bolts, an impact driver can tackle virtually everything.

Types of Drivers Available

There are several different types of impact drivers available. Some common ones include corded and cordless models. Corded impact drivers require a source of electrical current to run. Cordless impact drivers only require batteries. Both options are safe and effective depending on the type of project you are performing.

Corded vs. Cordless

Most manufacturers recommend that you use a corded impact driver for smaller jobs. While cordless impact drivers are convenient, they lack the torque necessary to drive larger fasteners. Furthermore, cordless impact drivers cannot be plugged directly into outlets. Instead, they require charging stations. Charging stations are generally bulky and inconvenient.

Drilling Speed

One of the biggest differences between a corded and cordless impact driver is

An electric powered tool is essential for most jobs around the house. From drilling holes in drywall to driving screws into concrete, there’s no task too small or large for these tools. However, choosing the right power tool isn’t always easy. There are many different types available, each designed to perform specific functions. Here we take a closer look at three popular models and highlight features to look for when purchasing an impact driver.

The Bosch Powermatic 18V Compact Drilling Machine

This compact unit has a maximum speed of 1,500 RPM and comes equipped with a variable speed trigger switch. It weighs only 4 pounds making it ideal for smaller projects where portability is important. Its lightweight design makes it easier to carry around while still providing powerful performance.

The Milwaukee M18XR Variable Speed Hammer Driver

With its ergonomic handle, this hammer driver offers two speeds – slow (600 RPM) and fast (1,200 RPM). It’s perfect for general household applications including framing walls, installing trim, hanging pictures, etc. With its adjustable clutch mechanism, users can adjust the torque setting depending on the material being drilled.

The Makita XCD20C 20V Corded Electric Impact Driver

This cordless impact driver is capable of delivering 2,000 foot per minute which makes it suitable for heavy duty applications. It includes a built-in LED light that illuminates the work area during operation. Users can set the depth control between 0mm and 60mm and select either high or low speed modes.

Benefits of Using an Impact Driver

Powerful motor delivers higher torque output

Easy to operate

Lightweight and portable

Ergonomically shaped handles

Adjustable clutch mechanism

LED lighting

<

An impact driver is a power tool designed to drive fasteners into hard materials. An impact driver has two parts – a motor which generates torque (rotational force) and a hammer mechanism which delivers the rotational force to the tip of the driver.

Types of Impact Drivers

Impact drivers are available in corded and cordless versions. Corded models require a battery pack while cordless models run on rechargeable batteries.

The most common type of impact driver is the pneumatic powered version. Pneumatic impact drivers operate using compressed air rather than electricity. Air pressure pushes the piston forward causing the driver head to strike the nail.

Electric impact drivers are another popular choice. Electric impact drivers deliver high speed rotation via electric motors. Most electric impact drivers include variable speeds ranging from slowest to fastest.

Air driven impact drivers are very powerful tools. However, these devices are noisy and produce large amounts of dust. For safety reasons, we recommend avoiding these tools unless absolutely necessary.

Hand held impact drivers are lightweight and easy to handle. Handheld impact drivers are ideal for driving small nails and screws. Some handheld impact drivers incorporate LED lights to illuminate the work site.

Benchtop impact drivers are heavy duty machines. Benchtop impact drivers are best suited for drilling holes larger than 1 inch diameter. Benchtop impact drivers typically weigh between 10 pounds and 100 pounds.

Cordless impact drills are compact and light weight. Cordless impact drills are perfect for those who travel frequently. Many cordless impact drills allow users to change bits quickly and efficiently.

Powerful cordless impact drills are capable of delivering higher RPM rates. Powercordless impact drills are useful for drilling holes larger than 2 inches in diameter.

Powered hand held impact drills are versatile tools. Powered hand held impact drills are excellent for drilling holes smaller than 3 inches in diameter.

Rotary hammers are used to drive fasteners into concrete, masonry, brick, tile, stone, etc. Rotary hammers are generally heavier than bench top impact drivers.

Sawzall style impact drivers are used to cut metal. Sawzalls are lighter than

The Importance of Purchasing a Quality Impact Drill

An impact driver is a tool which has been around since the early 1900’s. An impact driver was originally designed to be used with nails and screws. However, today there are many different types of drivers available including drills, screwdrivers, nutrunners, etc. There are two main reasons why you should invest in an impact driver; safety and efficiency.

Safety

Impact drivers are very dangerous tools. In fact, according to OSHA (Occupational Safety & Health Administration), “an electric motor-driven power tool is considered hazardous equipment because of its potential to cause serious injury or death.” Therefore, it is important to take precautions while using these devices. For example, always wear eye protection and ear plugs whenever operating an impact driver. Always keep children away from the machine and ensure that no objects are placed near the point where the hammer strikes the object being drilled into. Never operate the tool unless you understand how to properly hold it and position it correctly.

Efficiency

Another reason why you should invest in an impact driver is due to its ability to efficiently perform multiple functions. Most impact drivers include both a drilling function and a driving function. As mentioned above, most impact drivers are powered by electricity. Electricity is extremely efficient compared to gasoline engines. Because of this, an impact driver is able to complete a task faster than a traditional hand held drill. Additionally, impact drivers are typically quieter than gas driven drills. This is especially helpful during construction projects where noise levels must remain low. Lastly, impact drivers are versatile enough to handle almost anything. From small holes to large diameter bolts, an impact driver can tackle virtually everything.

Types of Drivers Available

There are several different types of impact drivers available. Some common ones include corded and cordless models. Corded impact drivers require a source of electrical current to run. Cordless impact drivers only require batteries. Both options are safe and effective depending on the type of project you are performing.

Corded vs. Cordless

Most manufacturers recommend that you use a corded impact driver for smaller jobs. While cordless impact drivers are convenient, they lack the torque necessary to drive larger fasteners. Furthermore, cordless impact drivers cannot be plugged directly into outlets. Instead, they require charging stations. Charging stations are generally bulky and inconvenient.

Drilling Speed

One of the biggest differences between a corded and cordless impact driver is

An electric powered tool is essential for most jobs around the house. From drilling holes in drywall to driving screws into concrete, there’s no task too small or large for these tools. However, choosing the right power tool isn’t always easy. There are many different types available, each designed to perform specific functions. Here we take a closer look at three popular models and highlight features to look for when purchasing an impact driver.

The Bosch Powermatic 18V Compact Drilling Machine

This compact unit has a maximum speed of 1,500 RPM and comes equipped with a variable speed trigger switch. It weighs only 4 pounds making it ideal for smaller projects where portability is important. Its lightweight design makes it easier to carry around while still providing powerful performance.

The Milwaukee M18XR Variable Speed Hammer Driver

With its ergonomic handle, this hammer driver offers two speeds – slow (600 RPM) and fast (1,200 RPM). It’s perfect for general household applications including framing walls, installing trim, hanging pictures, etc. With its adjustable clutch mechanism, users can adjust the torque setting depending on the material being drilled.

The Makita XCD20C 20V Corded Electric Impact Driver

This cordless impact driver is capable of delivering 2,000 foot per minute which makes it suitable for heavy duty applications. It includes a built-in LED light that illuminates the work area during operation. Users can set the depth control between 0mm and 60mm and select either high or low speed modes.

Benefits of Using an Impact Driver

Powerful motor delivers higher torque output

Easy to operate

Lightweight and portable

Ergonomically shaped handles

Adjustable clutch mechanism

LED lighting

Powerful motor delivers higher torque output

Easy to operate

Lightweight and portable

Ergonomically shaped handles

Adjustable clutch mechanism

LED lighting

An impact driver is a power tool designed to drive fasteners into hard materials. An impact driver has two parts – a motor which generates torque (rotational force) and a hammer mechanism which delivers the rotational force to the tip of the driver.

Types of Impact Drivers

Impact drivers are available in corded and cordless versions. Corded models require a battery pack while cordless models run on rechargeable batteries.

The most common type of impact driver is the pneumatic powered version. Pneumatic impact drivers operate using compressed air rather than electricity. Air pressure pushes the piston forward causing the driver head to strike the nail.

Electric impact drivers are another popular choice. Electric impact drivers deliver high speed rotation via electric motors. Most electric impact drivers include variable speeds ranging from slowest to fastest.

Air driven impact drivers are very powerful tools. However, these devices are noisy and produce large amounts of dust. For safety reasons, we recommend avoiding these tools unless absolutely necessary.

Hand held impact drivers are lightweight and easy to handle. Handheld impact drivers are ideal for driving small nails and screws. Some handheld impact drivers incorporate LED lights to illuminate the work site.

Benchtop impact drivers are heavy duty machines. Benchtop impact drivers are best suited for drilling holes larger than 1 inch diameter. Benchtop impact drivers typically weigh between 10 pounds and 100 pounds.

Cordless impact drills are compact and light weight. Cordless impact drills are perfect for those who travel frequently. Many cordless impact drills allow users to change bits quickly and efficiently.

Powerful cordless impact drills are capable of delivering higher RPM rates. Powercordless impact drills are useful for drilling holes larger than 2 inches in diameter.

Powered hand held impact drills are versatile tools. Powered hand held impact drills are excellent for drilling holes smaller than 3 inches in diameter.

Rotary hammers are used to drive fasteners into concrete, masonry, brick, tile, stone, etc. Rotary hammers are generally heavier than bench top impact drivers.

Sawzall style impact drivers are used to cut metal. Sawzalls are lighter than

Impact drivers are available in corded and cordless versions. Corded models require a battery pack while cordless models run on rechargeable batteries.

The most common type of impact driver is the pneumatic powered version. Pneumatic impact drivers operate using compressed air rather than electricity. Air pressure pushes the piston forward causing the driver head to strike the nail.

Electric impact drivers are another popular choice. Electric impact drivers deliver high speed rotation via electric motors. Most electric impact drivers include variable speeds ranging from slowest to fastest.

Air driven impact drivers are very powerful tools. However, these devices are noisy and produce large amounts of dust. For safety reasons, we recommend avoiding these tools unless absolutely necessary.

Hand held impact drivers are lightweight and easy to handle. Handheld impact drivers are ideal for driving small nails and screws. Some handheld impact drivers incorporate LED lights to illuminate the work site.

Benchtop impact drivers are heavy duty machines. Benchtop impact drivers are best suited for drilling holes larger than 1 inch diameter. Benchtop impact drivers typically weigh between 10 pounds and 100 pounds.

Cordless impact drills are compact and light weight. Cordless impact drills are perfect for those who travel frequently. Many cordless impact drills allow users to change bits quickly and efficiently.

Powerful cordless impact drills are capable of delivering higher RPM rates. Powercordless impact drills are useful for drilling holes larger than 2 inches in diameter.

Powered hand held impact drills are versatile tools. Powered hand held impact drills are excellent for drilling holes smaller than 3 inches in diameter.

Rotary hammers are used to drive fasteners into concrete, masonry, brick, tile, stone, etc. Rotary hammers are generally heavier than bench top impact drivers.

Sawzall style impact drivers are used to cut metal. Sawzalls are lighter than

Categories: Reviews

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *