List of Top 10 Best Long Drill Bits

Bestseller No. 1
Extra Long 12" Brad Point Wood Drill Bit Set (12 Pack with Storage Sleeve) Carpenters Quality - Drill Splinter-Free Perfectly Round Holes in All Types of Wood
  • 12 PIECE BRAD POINT DRILL BIT SET - In the following sizes: 1/8" (2 INCLUDED), 5/32, 3/16", 1/4" (2 INCLUDED), 5/16", 3/8 (2 INCLUDED), 7/16", and 1/2" (2 INCLUDED)
  • EXTRA LONG 12 INCH LENGTH - Easily drill into beams, joists, legs, and all those hard to reach areas with this foot long drill wood drill bits.
  • CENTER POINT - Brad point tip provides precision accuracy for starting your drilling hole
  • PERFECT FOR ALL TYPES OF WOOD - These specially engineered drill bits are specifically made to reduce chipping and splintering. Easily drill into Natural Woods like Pine, Maple, Cedar, Oak, Ash, and More. These also work will on all types of engineered woods.
  • LIFETIME GUARANTEE - Here at Owl Tools (USA Based Company) we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
Bestseller No. 2
NEIKO 10047A Extra Long Drill Bit Set | 5-Piece | M2 HSS Steel | 12-Inch Length | 1/8, 3/16, 1/4, 5/16, and 3/8-Inch
  • [LONG REACH]: Extra-long drill bits give you 12 inches of added length to work with and provides more stability during quick operations.
  • [DURABLE]: These drill bits are made from heat-treated M2 high speed steel for excellent hardness, wear resistance, and toughness.
  • [SMOOTH DRILLING]: Combining high hardness and sharp pointed tips, these drill bits easily puncture tough materials for a smooth drilling finish.
  • [VERSATILE]: Long drill bits can be used for drilling into metal, wood, plastic, PVC, and many other materials.
  • [INCLUDES]: This extra-long drill bit set has (5) standard sizes of 12-inch drill bits that includes: 1/8-inch, 3/16-inch, 1/4-inch, 5/16-inch, and 3/8-inch.
Bestseller No. 3
Baker and Bolt Extra Long 12" Brad Point Drill Bit Set for Wood Stainless Steel Wood Drill Bits Set | Pack of 10 with Storage Sleeve
  • GIFD - OUR MISSION IS SIMPLE: To help enthusiasts, homeowners, hobbyists, tradesmen, Shadetree Mechanics and perfectionists get the job f*#king done. *NOTE- these are the 10 pcs 12" long point drill bits for wood. Not the 5 inch wood drill bit set.
  • SUITABLE FOR VARIOUS APPLICATIONS: Brad point drill bits that fit bench drill, and conventional hand drill. High hardness, superior drilling power and durability. Perfect for hardwood, particleboard, fiberboard, plastic, plywood, PVC, rubber etc.
  • THERE IS NO ONE IN OUR LEVEL: We have created the best extra long drill bit set anywhere. Insanely sharp steel, a FULL 10pc set, including sizes 1/8", 9/64”, 5/32”, 11/64", 3/16", 7/32", 1/4”, 5/16", 7/16”, 1/2", and a storage sleeve - to keep 'em all organised.
  • BRAD POINT DRILL BITS SET FOR WOOD FEATURES: Extra-long brad-point specifically manufactured for you to hit all the hard-to-reach places. The sharp point on the tip allows you to pinpoint the mark offering superior no skid accuracy and centering.
  • YOUR SATISFACTION IS THE ONLY THING THAT MATTERS TO US - Unsatisfied customers can't dominate projects. If you need a refund, replacement, or any support at all just shoot us a message. A 1-Year Warranty applies to all Baker and Bolt products.
Bestseller No. 4
wesleydrill Extra Long Brad Point Drill Bit Set 7 Pcs 12" 300mm Carbon Steel Wood Drill Bits Set Fit for Bench Hand and Conventional Electric Drill
  • [Specifications and packaging]: 7pcs 12" long point wood drill bits set.Include size:1/8",5/32",3/16",1/4", 5/16", 3/8",1/2".
  • [Fitment]: Brad point drill bits suitable for bench drill, hand drill and conventional electric drill. Perfect for hardwood, fiberboard, particleboard, plywood, plastic, PVC, rubber etc.
  • [Material]: Long drill bits are made of classic carbon steel material for fast cutting against tough wood material. High hardness, offer superior cutting power and durable.
  • [Advantage]: Impact wood drill bits set extra long 300mm body provides better stability and balance during quick operation to ensure position is intact. Flute length is 180mm with round shank and reduced shank.
  • [Brad-Point design]: Extra long drill bits's brad-point design can penetrate surface quickly because of the sharp point on the tip. This allows the user to pinpoint the mark with the drill bit. Better in centering and no skid.
SaleBestseller No. 5
BOSCH DLSB1007 1-Piece 5/8 In. x 16 In. Daredevil Extended Length Spade Bits
  • Features a full-cone threaded tip for fast and effortless drilling
  • Contoured paddle for fast chip removal
  • Hex shank power groove to reduce slippage
  • Spur and reamer tips for cleaner holes
  • Provides a cleaner hole quality with reduced breakout
SaleBestseller No. 6
BOSCH BL2739 3/16 In. x 12 In. Extra Length Aircraft Black Oxide Drill Bit
  • Speed helix design for three times faster drilling than standard bits
  • Last 50 percent longer than high-speed steel
  • Easier drilling, reduced heat and extended drill bit life
  • Available in jobber length, stubby length, extended length (aircraft), 1 2 In. reduced shank (Silver and Deming)
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
SaleBestseller No. 7
8 Pcs 200mm Extra Long Twist Drill Bits for Steel Straight Shank Tool Sets Wood Plastic and Aluminum, Plastic, Jewelry 2mm - 7mm
  • Diameter: 2mm(0.08in) 2.5mm(0.09in) 3mm(0.12in) 4mm(0.16in) 4.5mm(0.18in) 5mm(0.2in) 6mm(0.24in) 7mm(0.28in).Length:about 200mm(about 7.8 inch)
  • Application:drill bits kit are great for most drilling jobs and materials such as aluminum, wood, plastics PVC and other different materials or your daily drill use.
  • Quantity:This set includes 8 pieces drill bit in different sizes of the most popular drill bits.1 pc/per size.
  • provides better stability and balance during quick operation to ensure position is intact
  • Suitable for many electric drills and drills
Bestseller No. 8
BOSCH BL2633 3/32 In. x 6 In. Extra Length Aircraft Black Oxide Drill Bit
  • Speed helix design for three times faster drilling than standard bits
  • Last 50 percent longer than high-speed steel
  • Easier drilling, reduced heat and extended drill bit life
  • Available in jobber length, stubby length, extended length (aircraft), 1/2 In. reduced shank (Silver and Deming)
  • For use in steel, copper, aluminum, brass, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon and composite materials
Bestseller No. 10
IRWIN 1890707 Straight Shank Installer Drill Bit for Wood, 18-Inch by 1/4-Inch
  • 82˚ point for fast, smooth drilling in wood
  • Hole in flute for easy wire pulling through walls, ceilings and floors
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling Hole not included on 12" length bits
  • Premium high carbon steel construction for extended drilling life in wood

Buyer’s Guide

How to choose the
best long drill bits

What is the Purpose Of Long Drill Bits?

Long drill bits are designed to be used with longer drills. Most common uses include drilling holes into concrete walls, installing drywall screws, and making pilot holes for larger fasteners. Longer drill bits allow you to get deeper into materials while using fewer passes. For example, if you wanted to install two 2×4 studs across a wall, you could use a shorter drill bit (like a 1/2 inch) to create a hole between each stud, then switch to a longer bit (1-inch) to drive the screw.

How Do You Use Longer Drills?

The most obvious way to use longer drill bits is to drill holes. However, there are many other ways to use longer drill bits. One popular application is to use longer bits to cut sheetrock. Sheetrock has a tendency to crumble when drilled with short bits, which causes problems during installation. Using longer bits cuts away the crumbling material and leaves behind a solid piece of sheetrock ready for finishing.

Benefit From More Versatility

Using longer drill bits gives you greater versatility. With shorter bits, you must change tools frequently because the tip gets worn down quickly. Larger diameter bits give you more control over where you are drilling. In addition, longer bits require less force to start and stop the rotation of the tool. This reduces fatigue and increases efficiency.

Use Longer Bits To Cut Concrete

Concrete is another material that benefits from being drilled with longer bits. Short bits leave small chips around the edges of the hole. As these chips fall apart, they become loose pieces of cement that can cause cracks in finished floors. Longer bits remove the entire chunk of concrete leaving no loose particles.

Cut Drywall Faster

Drywall is commonly installed using nails. Nails are driven into the studs and then attached to the drywall. Because the heads of the nail are smaller than the thickness of the drywall, the drywall needs to be trimmed flush with the head of the nail. Cutting drywall with a shorter bit results in uneven trimming. Trimming drywall with a longer bit removes enough material to ensure a flat finish.

Installing wall panels requires multiple steps. First, the panel is nailed onto the studs. Then, the panel is hung. Finally, the seams are taped. Each step takes several minutes. Installing wall panels faster saves money and improves productivity.

Long drill bits are essential tools for most DIY projects. Whether you’re drilling holes into walls, installing drywall anchors, or creating custom shelves, these versatile tools allow you to get the job done quickly and efficiently. However, choosing the right size and type of drill bit can be difficult. Here are three tips to keep in mind when selecting a long drill bit.

    Know your project – Before starting any project, determine exactly which part of the wall needs to be drilled. For example, if you plan to install drywall anchors, you must select a longer drill bit. Otherwise, you could end up damaging the anchor itself.

    Measure twice – Measure the length of the hole you intend to create using a tape measure. Then, double check your measurements to ensure accuracy.

    Use the correct tool – Select a drill bit based on the material being worked upon. For instance, if you’re drilling into concrete, you’ll require a larger diameter drill bit. Conversely, if you’re drilling into plasterboard, you’ll need a smaller diameter drill bit. In addition, you’ll need different types of drill bits depending on whether you’re drilling straight lines or curved paths.

    How To Use A Long Drilling Bit

    Once you’ve selected the appropriate drill bit, follow these steps to complete your task successfully.

    Insert the tip of the drill bit into the center of the hole you wish to create. Make sure the drill bit isn’t too deep inside the hole. Too far in, and you risk breaking the wall. Too shallow, and you run the risk of hitting the ceiling above.

    Turn the handle clockwise while slowly pushing the drill bit forward. Continue turning the handle counterclockwise until the desired depth has been reached.

    Remove the drill bit from the hole once finished.

    Tips For Using Long Drill Bites

    Here are a few additional tips to remember when using long drill bits.

      Features To Look For In Long Drill Bits

      Long drill bits

      The longer the drill bit, the easier it is to get into tight places.

      They’re good for drilling holes in hard materials.

      Drill bits are available in different lengths depending on the size of hole required.

      Some drills include accessories such as screwdrivers and wrenches.

      Shorter drill bits

      These are useful for smaller jobs where there isn’t enough room to fit a full-length drill bit.

      Short drill bits are generally cheaper than long ones.

      They’re ideal for general maintenance purposes.

      Most short drill bits are designed specifically for specific applications.

      Choosing between long and shorter drill bits

      It depends on the type of material being drilled. Harder materials require longer bits while softer materials call for shorter bits.

      For example, metal requires longer bits because the heat generated during drilling causes the metal to expand slightly which could cause the bit to break.

      Wooden furniture needs shorter bits because the heat produced during drilling causes the wood to shrink slightly which could result in splitting.

      Types of long drill bits

      There are two main types of long drill bits – straight and angled.

      Straight bits are most commonly found in power tools whereas angled bits are typically associated with hand held devices.

      Angled bits are best suited for drilling holes in flat surfaces.

      Straight bits are suitable for drilling holes in curved surfaces.

      How to select a long drill bit

      Look at the length of the drill bit. Make sure it has sufficient length to reach the part of the object you wish to drill.

      Check whether the drill bit includes accessories such as screws, washers and nuts.

      Consider the diameter of the drill bit. Larger diameters allow for greater penetration depth.

      Think about the hardness of the material you plan to drill. Holes in harder materials require longer drill bits.

      Drill bits are essential tools for most DIY projects. There are many different kinds of drills available today, each designed for specific purposes. For example, there are standard twist drills which are commonly found in hardware stores, while specialty drills are designed specifically for certain applications. In addition, there are several types of long drill bits including straight bits, angled bits, spiral bits, and others.

      Straight Bit

      The simplest type of drill bit is called a straight bit. Straight bits are typically longer than regular drill bits and are ideal for drilling holes into hard materials. However, these bits aren’t very useful for cutting material because they only cut along the length of the hole. To get around this problem, manufacturers developed special designs known as “angled bits” which allow users to create multiple cuts simultaneously.

      Angled Bit

      An angled bit has two sides – a flat side and a sloped side. As the name suggests, the angle between the two sides creates a V shape. Angled bits are generally shorter than straight bits and are best suited for drilling small holes. Because angled bits are short, they require fewer rotations per minute (RPM) to complete a task. Therefore, they are easier to control and operate.

      Spiral Bit

      Another popular type of drill bit is the spiral bit. Spiral bits are shaped like a corkscrew and consist of three parts – a tip, shank, and flute. Unlike angled bits, spiral bits rotate continuously during operation. This continuous rotation causes the spirals to spin faster than angled bits. Thus, spiral bits are able to cut material quickly and efficiently.

      Specialty Drills

      There are numerous specialized drills available today. Some examples include spade bits, starbursts, and keyhole bits. Spade bits are designed to be used with power tools such as circular saws and reciprocating saws. Starburst bits are primarily intended for use with hand held electric screwdrivers. Keyhole bits are designed to fit into larger diameter holes. All of these specialty bits are extremely versatile and are perfect for creating unique decorative features in furniture, metalwork, and jewelry making.

      Long Drill Bits


Categories: Reviews


Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *